<%@LANGUAGE="VBSCRIPT"%> <% set ys_mdb = Server.CreateObject("ADODB.Recordset") ys_mdb.ActiveConnection = MM_ys_mdb_STRING ys_mdb.Source = "SELECT * FROM Store ORDER BY id DESC" ys_mdb.CursorType = 0 ys_mdb.CursorLocation = 2 ys_mdb.LockType = 3 ys_mdb.Open() ys_mdb_numRows = 0 %> <% Dim Repeat1__numRows Repeat1__numRows = 30 Dim Repeat1__index Repeat1__index = 0 ys_mdb_numRows = ys_mdb_numRows + Repeat1__numRows %> <% ' *** Recordset Stats, Move To Record, and Go To Record: declare stats variables ' set the record count ys_mdb_total = ys_mdb.RecordCount ' set the number of rows displayed on this page If (ys_mdb_numRows < 0) Then ys_mdb_numRows = ys_mdb_total Elseif (ys_mdb_numRows = 0) Then ys_mdb_numRows = 1 End If ' set the first and last displayed record ys_mdb_first = 1 ys_mdb_last = ys_mdb_first + ys_mdb_numRows - 1 ' if we have the correct record count, check the other stats If (ys_mdb_total <> -1) Then If (ys_mdb_first > ys_mdb_total) Then ys_mdb_first = ys_mdb_total If (ys_mdb_last > ys_mdb_total) Then ys_mdb_last = ys_mdb_total If (ys_mdb_numRows > ys_mdb_total) Then ys_mdb_numRows = ys_mdb_total End If %> <% ' *** Recordset Stats: if we don't know the record count, manually count them If (ys_mdb_total = -1) Then ' count the total records by iterating through the recordset ys_mdb_total=0 While (Not ys_mdb.EOF) ys_mdb_total = ys_mdb_total + 1 ys_mdb.MoveNext Wend ' reset the cursor to the beginning If (ys_mdb.CursorType > 0) Then ys_mdb.MoveFirst Else ys_mdb.Requery End If ' set the number of rows displayed on this page If (ys_mdb_numRows < 0 Or ys_mdb_numRows > ys_mdb_total) Then ys_mdb_numRows = ys_mdb_total End If ' set the first and last displayed record ys_mdb_first = 1 ys_mdb_last = ys_mdb_first + ys_mdb_numRows - 1 If (ys_mdb_first > ys_mdb_total) Then ys_mdb_first = ys_mdb_total If (ys_mdb_last > ys_mdb_total) Then ys_mdb_last = ys_mdb_total End If %> <% ' *** Move To Record and Go To Record: declare variables Set MM_rs = ys_mdb MM_rsCount = ys_mdb_total MM_size = ys_mdb_numRows MM_uniqueCol = "" MM_paramName = "" MM_offset = 0 MM_atTotal = false MM_paramIsDefined = false If (MM_paramName <> "") Then MM_paramIsDefined = (Request.QueryString(MM_paramName) <> "") End If %> <% ' *** Move To Record: handle 'index' or 'offset' parameter if (Not MM_paramIsDefined And MM_rsCount <> 0) then ' use index parameter if defined, otherwise use offset parameter r = Request.QueryString("index") If r = "" Then r = Request.QueryString("offset") If r <> "" Then MM_offset = Int(r) ' if we have a record count, check if we are past the end of the recordset If (MM_rsCount <> -1) Then If (MM_offset >= MM_rsCount Or MM_offset = -1) Then ' past end or move last If ((MM_rsCount Mod MM_size) > 0) Then ' last page not a full repeat region MM_offset = MM_rsCount - (MM_rsCount Mod MM_size) Else MM_offset = MM_rsCount - MM_size End If End If End If ' move the cursor to the selected record i = 0 While ((Not MM_rs.EOF) And (i < MM_offset Or MM_offset = -1)) MM_rs.MoveNext i = i + 1 Wend If (MM_rs.EOF) Then MM_offset = i ' set MM_offset to the last possible record End If %> <% ' *** Move To Record: if we dont know the record count, check the display range If (MM_rsCount = -1) Then ' walk to the end of the display range for this page i = MM_offset While (Not MM_rs.EOF And (MM_size < 0 Or i < MM_offset + MM_size)) MM_rs.MoveNext i = i + 1 Wend ' if we walked off the end of the recordset, set MM_rsCount and MM_size If (MM_rs.EOF) Then MM_rsCount = i If (MM_size < 0 Or MM_size > MM_rsCount) Then MM_size = MM_rsCount End If ' if we walked off the end, set the offset based on page size If (MM_rs.EOF And Not MM_paramIsDefined) Then If (MM_offset > MM_rsCount - MM_size Or MM_offset = -1) Then If ((MM_rsCount Mod MM_size) > 0) Then MM_offset = MM_rsCount - (MM_rsCount Mod MM_size) Else MM_offset = MM_rsCount - MM_size End If End If End If ' reset the cursor to the beginning If (MM_rs.CursorType > 0) Then MM_rs.MoveFirst Else MM_rs.Requery End If ' move the cursor to the selected record i = 0 While (Not MM_rs.EOF And i < MM_offset) MM_rs.MoveNext i = i + 1 Wend End If %> <% ' *** Move To Record: update recordset stats ' set the first and last displayed record ys_mdb_first = MM_offset + 1 ys_mdb_last = MM_offset + MM_size If (MM_rsCount <> -1) Then If (ys_mdb_first > MM_rsCount) Then ys_mdb_first = MM_rsCount If (ys_mdb_last > MM_rsCount) Then ys_mdb_last = MM_rsCount End If ' set the boolean used by hide region to check if we are on the last record MM_atTotal = (MM_rsCount <> -1 And MM_offset + MM_size >= MM_rsCount) %> <% ' *** Go To Record and Move To Record: create strings for maintaining URL and Form parameters ' create the list of parameters which should not be maintained MM_removeList = "&index=" If (MM_paramName <> "") Then MM_removeList = MM_removeList & "&" & MM_paramName & "=" MM_keepURL="":MM_keepForm="":MM_keepBoth="":MM_keepNone="" ' add the URL parameters to the MM_keepURL string For Each Item In Request.QueryString NextItem = "&" & Item & "=" If (InStr(1,MM_removeList,NextItem,1) = 0) Then MM_keepURL = MM_keepURL & NextItem & Server.URLencode(Request.QueryString(Item)) End If Next ' add the Form variables to the MM_keepForm string For Each Item In Request.Form NextItem = "&" & Item & "=" If (InStr(1,MM_removeList,NextItem,1) = 0) Then MM_keepForm = MM_keepForm & NextItem & Server.URLencode(Request.Form(Item)) End If Next ' create the Form + URL string and remove the intial '&' from each of the strings MM_keepBoth = MM_keepURL & MM_keepForm if (MM_keepBoth <> "") Then MM_keepBoth = Right(MM_keepBoth, Len(MM_keepBoth) - 1) if (MM_keepURL <> "") Then MM_keepURL = Right(MM_keepURL, Len(MM_keepURL) - 1) if (MM_keepForm <> "") Then MM_keepForm = Right(MM_keepForm, Len(MM_keepForm) - 1) ' a utility function used for adding additional parameters to these strings Function MM_joinChar(firstItem) If (firstItem <> "") Then MM_joinChar = "&" Else MM_joinChar = "" End If End Function %> <% ' *** Move To Record: set the strings for the first, last, next, and previous links MM_keepMove = MM_keepBoth MM_moveParam = "index" ' if the page has a repeated region, remove 'offset' from the maintained parameters If (MM_size > 0) Then MM_moveParam = "offset" If (MM_keepMove <> "") Then params = Split(MM_keepMove, "&") MM_keepMove = "" For i = 0 To UBound(params) nextItem = Left(params(i), InStr(params(i),"=") - 1) If (StrComp(nextItem,MM_moveParam,1) <> 0) Then MM_keepMove = MM_keepMove & "&" & params(i) End If Next If (MM_keepMove <> "") Then MM_keepMove = Right(MM_keepMove, Len(MM_keepMove) - 1) End If End If End If ' set the strings for the move to links If (MM_keepMove <> "") Then MM_keepMove = MM_keepMove & "&" urlStr = Request.ServerVariables("URL") & "?" & MM_keepMove & MM_moveParam & "=" MM_moveFirst = urlStr & "0" MM_moveLast = urlStr & "-1" MM_moveNext = urlStr & Cstr(MM_offset + MM_size) prev = MM_offset - MM_size If (prev < 0) Then prev = 0 MM_movePrev = urlStr & Cstr(prev) %> 上海云萨电子科技有限公司
YUNSA Online
云萨电子资讯网代理和经销全世界著名品牌的原装电子元器件，半导体器件，为用户提供有效质量保证服务
  
返回首页

 
Mill-Max Mill-Max is the leading US manufacturer of machined interconnect components. The Mill-Max product line includes spring-loaded connectors, SIP, DIP, PGA and BGA sockets, PLCC sockets, pin headers, and board-to-board interconnects, available in both surface mount and through hole. Additionally, Mill-Max has PCB pins, receptacles, solder terminals, wrapost receptacles, and swage mount pins.
Spring Loaded Connectors
Precision-machined gold-plated components and a low-resistance spring maintain a consistent electrical path for maximum continuity. Tested to a minimum of 50G shock and 10G vibration with no spikes >1μs and >1.15V with 0.5A applied. Maximum endurance is one million electrically silent cycles. The strip assemblies have .100” mounting grid, with low- and high-profile surface mount styles available from .137” to .430” on carrier tape or thru-hole style for manual placement. A choice of 31 discrete spring-loaded contacts is available for customer-specific assemblies; other sizes are available for specific individual applications.

More Information  
Mill-Max Spring Loaded Connectors
Selected Mill-Max products:
Mill-Max Capacitor Sockets
Mill-Max DIP High Density Sockets
Mill-Max DIP Low Profile Sockets
Mill-Max DIP Sockets
Mill-Max DIP Solderless Press-Fit Sockets
Mill-Max DIP Ultra Low Profile Sockets
Mill-Max Double Row Headers
Mill-Max PC Receptacles and Pins
Mill-Max PGA Sockets
Mill-Max PLCC Surface Mount Compact Sockets
Mill-Max PLCC Surface Mount Standard Sockets
Mill-Max PLCC Thru-Hole Standard Sockets
Mill-Max Single Row Headers
Mill-Max SIP Sockets
Mill-Max Spring Loaded Connectors
Mill-Max Transistor Sockets
Mill-Max USB Receptacles
and more
  站点首页 关于我们 技术支持 经营理念 联系我们  

上海云萨电子科技有限公司
 
ShangHai Yunsa Electronic Co., Ltd.
TEL: 021-5108-6191
FAX: 021-5108-6112
(C) YUNSA CORP. All Right Reserved 沪ICP备05001582号
<% ys_mdb.Close() %>